THE D.C. COOPER COMPANY

JUNCTION 116 & 94
P.O.Box 210
STRONGHURST, IL 61480-0210
PHONE: (309) 924-1941
or Call 1-800-536-9274
FAX: (309) 924-1945

E-MAIL: dccooper@hcil.net
D.C.Cooper Logo D.C. Cooper Home Page
Click here to return to Home Page.


Heated Tanks for Product Heating / Melting Applications


  • Hot Oil Dip Tank
  • Automatic Constant Level Tank



  • Hot Oil Dip Tank

    Hot Oil Dip Tank


    -for bearing expansion, tempering oils, quenching oils, preservative oils and grease

    Hot Oil Dip Tank


    Industrial Quality Equipment Features:

    • Bottom mounted strip heaters for most compounds

    • NEMA 12 construction with 110 volt controls

    • 3 inches of insulation for efficient heating

    • Insulated lid with UL listed fuse link

    • From 5 gallon capacities and up

    • Custom Designs to meet YOUR needs


    HOT OIL DIP TANK SPECIFICATIONS

    MODEL L" x W" x D" GAL. CAP. WATTS VOLTS/PHASE
    HO-30 30 x 17 x 14 30 3,000 220/1
    HO-60 36 x 24 x 17 60 4,500 220/1
    HO-90 36 x 24 x 24 90 9,000 220/3
    HO-180 48 x 30 x 30 180 18,000 220/3
    ROUND
    HO-3615R 36" dia. x 15" D. 65 9,000 220/3
    HO-4622R 46" dia. x 22" D. 150 12,000 220/3

    OTHER SIZES AND DIMENSIONS AVAILABLE


  • Back to Top
  • Additional Info

  • CONSTRUCTION & OPTIONS


    ELECTRICAL CONSTRUCTION
    NEMA 1 construction for single phase units. NEMA12 combination disconnect with 110 volt control circuit power for three phase units. Standard heat supplied by NEMA 1 strip heaters or optional stainless steel immersion screw plug heaters. Digital indicating temperature controller with type J thermocouple standard on all three phase units. Bulb and capillary thermostat with thermometer standard on singlephase units. Optional NEMA 7 construction available.

    MACHINE CONSTRUCTION
    Standard construction of compound tank is mild steel, 10 gauge thick, with all liquid bearing seams double welded inside out, and leak checked after each welding pass. Optional type 304 stainless steel construction available. Three inches of insulation on the bottom and three sides. Insulated lid with fusible safety closure. Outer shell constructed of 16 gauge mild steel and finished in Polane® polyurethane enamel. Full length stainless steel hinge on lid.

    OPTIONAL EQUIPMENT
    Optional 7 day timer and high temperature cutoff with manual reset and optional alarm available. Optional circulating pumps and filter are available for a wide variety of applications. Optional pneumatically operated lid. For hard to heat or process operation tanks, see our line of oil jacketed indirectly heated tanks.

    FEATURES & BENEFITS


    DIRECTLY HEATED DESIGN uses bottom or optional side and bottom mounted strip heaters to directly heat the compound to be melted. Provides quick heat up of compound.

    INDUSTRIAL DUTY INSULATION with three inches of fiberglass insulation on the bottom and four sides for improved thermal efficiency. Insulated lid improves heat up time and limits heat losses due to convection.

    DIGITAL TEMPERATURE CONTROLLER with type J thermocouple and digital readout of the compound chamber standard on all three phase units. Helps provide tight temperature control and accurate readout of compound temperature.

    FUSIBLE SAFETY CLOSURE closes lid automatically in the event of fire when used with combustible compounds. Standard UL approved 368 degree Fahrenheit fuse link. Other ranges available.

    HEAVY DUTY CONSTRUCTION features 10 gauge minimum inner tank construction with all seams electrically welded and structural frame supports integral to machine.

    CUSTOM SIZES AND APPLICATIONS with heated, temperature controlled and insulated delivery systems designed for your application. Tank sizes to meet virtually any need.

    CALL TODAY FOR A QUOTATION

    1-309-924-1941
    or 1-800-536-9274




    Automatic Constant Level Tank


    -for continous product application, fast heating, properly controlled temperature, long life, economy in operation, safety and comfort of operator



    Industrial Quality Melting Equipment
    Features:

    • Automatic operation with continous compound flow.
    • Double boiler design provides even, low density heating.
      No hot or cold spots in tank
    • .
    • Electrically heated oil jacket allows compound to run at any level, even empty, without damage to tank.

    • Indirect heat eliminates danger of fire or burning due to exposed heating surfaces.

    • Motor driven circulating pump constantly agitates and circulates product, providing constant flow of bubble-free molten product over top surface of dipping chamber.
    • NEMA 12 construction with 110 volt controls

    • Energy efficient with insulated lid and sides

    • Insulated lid with UL listed fuse link

    • From 5 gallon capacities and up

    • Custom Designs to meet YOUR needs
     


    AUTOMATIC CONSTANT LEVEL TANK
    SPECIFICATIONS

    MODEL L" x W" x D" GAL. CAP. WATTS VOLTS/PHASE
    ACL-5 16 x 11 x 8 5 2,500 230/1
    ACL-15 25 x 12 x 13 15 6,000 230/3
    ACL-30 30 x 17 x 14 30 12,000 230/3
    ACL-60 36 x 24 x 17 60 18,000 480/3
    ACL-90 36 x 24 x 24 90 24,000 480/3
    ACL-180 48 x 30 x 30 180 36,000 480/3
    ACL-295 60 x 36 x 32 295 48,000 480/3

    OTHER SIZES AND DIMENSIONS AVAILABLE


  • Back to Top
  • Additional Info

  • CONSTRUCTION & OPTIONS


    ELECTRICAL CONSTRUCTION
    NEMA 1 construction for single phase units. NEMA 12 combination disconnect with 110 volt control circuit power for three phase units. Oil jacket heated with either NEMA 4X immersion heaters or NEMA 1 strip heaters. Digital indicating temperature controller with type J thermocouple standard on all three phase units. Bulb and capillary thermostat with thermometer standard on singlephase units. Optional NEMA 7 construction available.

    MACHINE CONSTRUCTION
    Standard construction of compound tank is mild steel, 10 gauge thick, with all liquid bearing seams double welded inside out, and leak checked after each welding pass. Oil jacket constructed of 10 gauge mild steel and pressure leak tested. Optional type 304 stainless steel construction available. Three inches of insulation on the bottom and three sides. Insulated lid with fusible safety closure. Outer shell constructed of 16 gauge mild steel and finished in Polane® polyurethane enamel. Full length stainless steel hinge on lid.

    OPTIONAL EQUIPMENT
    Optional paddle style mixer is center mounted in circular tank and complete with all controls including a reverse acting thermostat to prevent operation before compound is melted. Available with fixed or variable speed operation. Optional 7 day timer and high temperature cutoff with manual reset and optional alarm available. Optional circulating pumps and filter are available for a wide variety of applications. Optional pneumatically operated lid.

    FEATURES & BENEFITS


    DOUBLE BOILER DESIGN uses a double walled and jacketed tank. The oil in the surrounding jacket is heated which then heats the material. Provides a low watt density heating for melting even the most difficult compounds.

    RUNS AT ANY LEVEL without damaging the heating elements or overheating the compound. Since the oil jacket is heated, the tank can even be run dry without damage or risk of fire.

    DIGITAL TEMPERATURE CONTROLLER with type J thermocouple and digital readout of the compound chamber standard on all three phase units. Helps provide tight temperature control and accurate readout of compound temperature.

    FUSIBLE SAFETY CLOSURE closes lid automatically in the event of fire when used with combustible compounds. Standard UL approved 368 degree Fahrenheit fuse link. Other ranges available.

    HEAVY DUTY CONSTRUCTION features 10 gauge minimum inner tank construction with all seams electrically welded and structural frame supports integral to machine.

    CUSTOM SIZES AND APPLICATIONS with heated, temperature controlled and insulated delivery systems designed for your application. Tank sizes to meet virtually any need.



    CALL TODAY FOR A QUOTATION

    1-309-924-1941
    or 1-800-536-9274





    D.C. Cooper Home Page
    Click here to return to Home Page.